home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Hand Picked Software
/
Hand Picked Software.iso
/
technicl
/
config
/
config.ini
< prev
next >
Wrap
Text File
|
1995-03-13
|
3KB
|
115 lines
# CONFIG.INI for PC-CONFIG from Version 7
# Lines beginning with # are comments only
# Possible switches Schalter: 1/0, ON/OFF, YES/NO
# Identify installed memory size and speed of graphics adapter?
# NB! For this test graphics modi are switched. If CONFIG is running under
# WINDOWS in a window, you must disable this test.
VideoTest=no
# Skip test to identify the chip-set on the graphics adapter?
SkipVGATest=no
# Write direct to screen?
DirectScreenWrites=yes
# Wait for flyback with CGA cards? (slows video output, but possibly
# avoids flicker/snow with older adapters)
SnowCheck=no
# Always use BIOS routines?(switch on if problems arise with less
# compatible computers)
UseBIOS=no
# Test access times for the hard disk(s)?
AccessTest=yes
# Always force the data transfer speed test for hard disks, even if an
# active cache is detected?
ForceHDspeed=yes
# Skip the test for an active cache?
SkipHDCacheTest=no
# Initialise the modem before testing? (some modems may otherwise not
# be recognised)
InitModem=no
# Try to identify main board chip set via hardwaretest. This causes some
# computers to crash, and can be disabled.
TestBoard=no
# Enter boardchipset manually, if detection should fail.
# These numbers are vaild:
# 0:Autodetect 1:UMC 2:SIS 3:CONTAC 4:ELITE
# 5:FOREX 6:OPTI 7:ETEQ 8:SYMPHONY 9:SHASTA
Chipsatz=0
# Test the access speed for Extended Memory? (Can be switched off if
# this test leads to crashes (because of privilege violations etc.)
TestExtMem=yes
# Skip testing of the short interval timer? The test doesn't work on some
# 486-66 MHz boards, so it can be disabled here:
SkipTimerTest=yes
# Try to get information about IDE hard disks? Can cause problems
# with certain MFM/RLL contollers (eg OMTI 8250).
# For registered users only!
ATbusInfo=yes
# Look for sound cards?
SearchForSoundCards=yes
# Look for resident CRT (screen output) accelerator programs?
SearchScreenSpeeder=yes
# Look for programs loaded in Hi-Dos?
HiDosSearch=yes
# In case the RAM disk was not detected, its allocated drive letter
# (letter only) can be specified here.
RamDisk=
# A particular drive can be specified here for the DOS read/write
# benchmark test. If 0 specified, the test is skipped. If left blank,
# the current drive at the time of test will be tested.
DosDisk=c
# Run CONFIG as continuous demo (only available in the commercial
# version with a special key).
DemoMode=no
# How many seconds should the demo run for?
DemoZeit=180
# How many seconds should each window be displayed?
DemoDelay=8
# Automatic logging during the test?
# (only in the commercial version with special key)
AutoLog=no
## What should be logged/ which windows should be displayed in the demo?
## Choose only from menu choices H,W,S,M,B,G:C,Q,T,V,X
Protokoll=hwsmtxv
# Load and show own comparison list (CONFIG.VGL)?
ShowVGL=no
# Enable program end with ESC key?
EndeBeiESC=no
# Window colors for monochrome display:
MBODYCOLOR=112
MFRAMECOLOR=112
MHEADERCOLOR=112
# Window colors for color display:
CBODYCOLOR=30
CFRAMECOLOR=27
CHEADERCOLOR=112
# Background color:
BACKGROUND=7